Bobcat Skid Steer Door Guide: Every Series, F to R
SSD
Skid Steer Doors of North America
JULY 2026
If you run a Bobcat skid steer or track loader with no door, or a cracked factory one, we build a shatterproof polycarbonate door that fits it. Skid Steer Doors of North America makes replacement doors for every Bobcat series: F, G, M, and R. Prices run $1,395 to $1,695. Every door is CNC-cut to fit your exact series, ships with the supplied hardware and printed instructions, and carries a limited lifetime warranty. Here is how to figure out which series you have and which door to order.
First, Figure Out Which Bobcat You Have
Plenty of owners bought their machine used and never got told what series it is. The dealer sticker is long gone and the paperwork is in a drawer somewhere. The good news is the model number tells you almost everything.
The letter at the front is the machine type. S means a wheeled skid steer, T means a track loader, and A means all-wheel steer. The numbers after it tell you the series.
| If your model number looks like | You have | Examples |
|---|---|---|
| S or T plus two digits | R Series (newest) | S64, S76, T66, T76 |
| S, T, or A plus three digits, 450 to 870 | M Series | S570, S650, T650, A770 |
| S, T, or A plus three digits, 110 to 320 | G Series | S250, T190, T300, A300 |
| A number only, no letter in front | F Series era or a mini | 463 |
Can’t find the model number? Check the serial number plate on the machine’s frame. If the plate is worn or you are still not sure, text a photo of it to (800) 781-8000 and we will identify the machine for you. We do it every week.
What Fits What: Every Bobcat Series We Cover
Each door below is a complete kit, CNC-cut from heavy-duty polycarbonate for the exact cab opening of that series. No trimming, no guesswork.
M Series Door, $1,695 (our best seller)
The Bobcat M Series door fits the S450, S510, S530, S550, S570, S590, S595, S630, S650, S740, S770, and S850 skid steers. On the track side it fits the T450, T550, T590, T595, T630, T650, T740, T750, T770, and T870, plus the A770.
That list covers the most common Bobcats working in the US today, which is a big part of why this door outsells everything else we make. If your machine is an S650 or a T650, this is your door.
R Series Door, $1,695
The R Series door fits Bobcat’s current generation: S62, S64, S66, S76, and S86 skid steers, and T62, T64, T66, T76, and T86 track loaders. R Series orders are placed by phone, so call or text (800) 781-8000 and we will set it up while you are on the line.
G Series Door, $1,395
The Bobcat G Series door fits the S150, S160, S175, S180, S200, S220, S250, S300, and S320, plus the T110, T140, T180, T190, T200, T250, T300, and T320 track loaders and the A300 and A320.
These early S and T machines are still earning their keep on farms and job sites all over the country. A new door is one of the cheapest ways to make an older G Series feel like a newer machine.
F Series Door, $1,395
The Bobcat F Series door covers the older Bobcats built before the company switched to S and T model names. Most door makers dropped these machines years ago. We didn’t. Building doors for older and obsolete machines is part of why we exist.
We also build a dedicated mini door for the Bobcat 463 and S70, priced at $1,395. If you run one of those little machines, you know how rare aftermarket parts are for them.
Not sure where your machine lands? Call us. Two minutes on the phone beats ordering twice.
Why the M Series Door Outsells Everything Else
No mystery here. Bobcat sold a pile of M Series machines, and most left the factory with an open cab or a glass door that eventually met a rock, a branch, or a pallet fork. When that glass lets go, owners look for something that won’t do it again.
Polycarbonate is the answer. It flexes and shrugs off hits that shatter tempered glass. We proved the point on camera when our owner Leighton took a hammer to our 1/2 inch thick CAT D door, unedited, and the door won. Same material family, same build philosophy, in every Bobcat door we ship. You can read the full comparison in our guide to polycarbonate vs. tempered glass doors.
For M Series owners we also have a dedicated M Series door page with model-specific details.
What’s in the Box
One box, everything you need. Every Bobcat door kit includes:
- The door itself, CNC-cut heavy-duty polycarbonate, precision fit to your series
- Door handle
- Locking latch with keys
- Hinges
- Weather seal gasket
- All nuts, bolts, and washers
No trip to the hardware store, no measuring and hoping. Every part you need is in the box, and the door was cut for your series before it left our shop.
How Hard Is the Install?
The panel is CNC-cut to fit your exact cab opening, but the mounting work is model-specific. Some kits bolt straight on and others require drilling and bolting, so use the printed instructions in the box as the authority for tools, steps, and whether a helper is recommended.
For a full walkthrough of tools and steps, see our guide on how to install a skid steer door.
One note on newer Bobcats: some machines have door sensors tied into the machine’s safety systems. Never modify or bypass those systems. If you have questions about how a new door works with your machine’s setup, call us at (800) 781-8000 and we’ll walk you through your machine’s setup.
What a Bobcat Door Costs, Start to Finish
Straight numbers, no dealer quote runaround:
- F Series door: $1,395
- G Series door: $1,395
- Bobcat 463 / S70 mini door: $1,395
- M Series door: $1,695
- R Series door: $1,695
- Shipping: UPS 3 Day Air, $150 flat, typically 3 business days (not guaranteed)
Every door is backed by our limited lifetime warranty against door failure or breakage: one free replacement for life for the original owner, under normal conditions. Hardware carries a 3 month warranty. We build these doors in North America and we stand behind them, because we were the first to bring the shatterproof polycarbonate skid steer door to market and we intend to stay the ones who do it right.
Beyond the door, the payoff shows up three ways. Safety: protection superior to tempered glass between you and whatever the job throws back. Comfort: a sealed cab holds heat in January and keeps dust out in August. Value: an enclosed cab lifts what your machine is worth the day you sell it.
Bottom Line
Find your model number, match it to the series table above, and order the door built for it. F and G Series run $1,395, M and R Series run $1,695, and every kit shows up with the supplied hardware and instructions for its model-specific installation. If anything about your machine is unclear, one call sorts it out.
Find your door in 30 seconds. Pick your machine’s make and model and see the exact door built for it: [Find Your Door]. Questions? Call or text (800) 781-8000, Mon–Fri 7am–4pm CST.